Skip to content

Final Grade Calculator

Enter your grade so far, the share of the course grade that the final exam is worth, and the grade you are aiming for. The page tells you the lowest score you can get on the final and still reach the target, and says plainly when the target is already safe or out of reach.

You need

68.34 % on the final

Current 85 % counts for 70 % of the course, the final for 30 %; target 80 %. Score at least this to finish on the target.
TargetNeeded on the final
90 %Out of reach (101.67 % needed)
80 %68.34 % on the final
70 %35 % on the final
60 %1.67 % on the final
50 %Already reached

How it works

  1. Enter your current grade as a percentage.
  2. Enter the weight of the final exam as a percentage of the whole course.
  3. Enter the grade you want at the end.
  4. Read the score you need, then look at the table for other targets and copy the summary.

What people use it for

  • Before the exam

    Know whether you need 95 % or only 60 % on the final to keep your grade.

  • Choosing a target

    Compare what each grade costs you on the final before deciding how to revise.

  • After a bad term

    See honestly whether a given grade is still possible.

Questions

What is the formula?
Needed = (target − current × (1 − w)) / w, where w is the weight of the final as a fraction. With a current 85 %, a final worth 30 % and a target of 80 %, you need (80 − 85 × 0.7) / 0.3 = 68.33 %, shown rounded up to 68.34 % so that you do not land just below.
What does “out of reach” mean?
The score needed is above 100 %. Even a perfect final would not lift your grade to the target. If your course gives extra credit, the real limit may be higher; the calculator assumes the final is scored out of 100.
What does “already reached” mean?
Your current grade already counts for enough that even a 0 on the final leaves you at or above the target. Check your syllabus: some courses require passing the final on its own.
Does it work with points instead of percentages?
Convert your points to a percentage first (points earned / points possible × 100). The weight must be the share of the final course grade, not the number of points. Grade scales and rounding rules differ between schools, so use your own syllabus for the final word.