Skip to content

Photo Storage Capacity Calculator

Type how many photos you have, the average size of one photo and the capacity of the card or disk, and you get the total volume, how many cards or disks you need, how many photos each one holds and how many land on the last one. A second mode answers the opposite question: how many photos fit on one card of a given size. You choose whether a gigabyte is 1,000 or 1,024 megabytes, since card makers and computers do not always agree. The arithmetic is exact, runs in your browser and sends nothing anywhere.

Cards or disks needed

2

3 GB of photos, 666 photos on each 2 GB support.
Photos on the last support
334
Free space on a full support
2 MB
By volume alone (if photos could be split)
2

Photos per support = ⌊capacity ÷ photo size⌋ and supports = ⌈photos ÷ photos per support⌉, because a photo is never cut between two cards. The formatting of a card, the folders and the sizes that vary from one photo to the next are not included: keep a margin.

How it works

  1. Choose what you want to know: the number of cards or disks, or the number of photos that fit on one.
  2. Type the number of photos (for the first mode) and the average size of one photo in megabytes.
  3. Type the capacity of one card or disk and pick GB or TB, then choose the base 1,000 or 1,024.
  4. Read the number of supports, the photos on each and on the last one, and copy the summary.

What people use it for

  • Packing for a trip

    Check how many 64 GB cards 20,000 photos of 8 MB need before you leave: 8,000 fit on a card, so 3.

  • Planning a backup

    Find out how many disks a family photo library takes, and how many photos land on the last one.

  • Choosing a card size

    See how many photos of a given size fit on 32 GB, 128 GB or 1 TB and pick the one that fits your shoot.

Questions

How is the number of cards calculated?
The page first finds how many whole photos fit on one support: ⌊capacity ÷ photo size⌋. The number of supports is then ⌈photos ÷ photos per support⌉, because a photo is never split between two cards. With 1,000 photos of 3 MB on 2 GB cards (base 1,000), the volume is 3 GB, each card holds 666 photos, so you need 2 cards and the last holds 334 photos. The page also shows the minimum by volume alone, ⌈volume ÷ capacity⌉, which can be lower when photos are large compared with the card.
Should I choose 1,000 or 1,024?
Both are used and the page does not choose for you. With 1,000, a GB is 1,000 MB and a TB is 1,000,000 MB; with 1,024, a GiB is 1,024 MiB and a TiB is 1,048,576 MiB. The same base is used for the photo size and for the capacity. Cards are often sold in base 1,000 while computers may show base 1,024, so the same card can look a little smaller on screen.
Which values are refused?
The number of photos is a whole number from 0 up to 1,000,000,000,000. The size of a photo must be at least 0.000001 MB, about one byte, and at most 1,000,000,000 MB. The capacity must be above 0 and up to 1,000,000. If one photo is larger than the whole card, the page says so instead of giving a number of cards, and the mode that counts the photos that fit shows 0. Every result is a finite number, and very large counts are written in full.
Does it count formatting, folders or video?
No. Formatting, system files, folders and the sizes that differ from one photo to the next are not included, so the result is only as good as the average size you type. Keep a margin, and for a safe plan use the largest photo size you expect rather than the average.