Poster Tile Calculator
Enter the size of the poster you want to print, the size of one sheet of paper and, if you wish, how much neighbouring sheets overlap, and you get the grid of sheets in columns and rows, the total number of sheets, the size the grid really covers and how much of it goes beyond the poster. The page compares the sheet used upright with the sheet turned on its side and tells you which one needs fewer sheets. It works in centimetres or inches, does the arithmetic in your browser and sends nothing anywhere.
Sheets needed (fewer of the two orientations)
15
Portrait (the shorter side across) needs 1 sheet fewer than the other orientation.
Along each side: 1 sheet if the poster is not longer than the sheet, otherwise 1 + ⌈(poster − sheet) ÷ (sheet − overlap)⌉. The poster keeps its width across; only the sheet is turned. If your printer leaves a margin, enter the printable area as the sheet size. Cut lines and crop marks are not drawn.
How it works
- Choose centimetres or inches, then type the width and the height of the finished poster.
- Type the width and the height of one sheet; if your printer leaves a margin, enter the printable area rather than the paper size.
- Enter the overlap between two neighbouring sheets, or 0 if the sheets only touch.
- Read the number of columns, rows and sheets for both orientations, see which is lower, and copy the summary.
What people use it for
Printing a banner on a home printer
Split a 100 × 70 cm drawing over A4-sized sheets and see how many pages to print for each orientation.
Planning a wall map or a school display
Check how many sheets to cut, trim and stick together before spending the paper and the ink.
Choosing between portrait and landscape
Compare both ways of laying the same sheet and keep the one that gives the smaller grid.
Questions
- How is the number of sheets calculated?
- Along each side, one sheet is enough when the poster is not longer than the sheet. Otherwise the count is 1 + ⌈(poster − sheet) ÷ (sheet − overlap)⌉, rounded up to a whole sheet. Without overlap this is simply ⌈poster ÷ sheet⌉: a 60 × 40 poster on 20 × 20 sheets gives 3 columns and 2 rows, so 6 sheets, and a 21 × 20 poster gives 2 columns and 1 row, so 2 sheets. The total is columns × rows.
- What does the overlap mean, and which values are refused?
- It is the width of the strip that two neighbouring sheets share, in the same unit as the sizes, and it is used on both the columns and the rows. Each new sheet then adds only its size minus the overlap. It must be 0 or more and smaller than the smaller side of the sheet, otherwise the sheets would never advance. Sizes must be above 0 and up to 1,000,000, and a grid of more than 1,000,000,000 sheets is refused with a message.
- What are portrait and landscape here?
- Portrait puts the shorter side of the sheet across and the longer side down; landscape does the opposite. The poster is never rotated: its width stays across. The page keeps the orientation with fewer sheets and, when the counts are equal, the one that covers less extra area. With a square sheet both orientations are identical, and the page says so.
- What is not included?
- The page counts sheets, it does not draw cut lines, print the pieces or add crop marks. Printer margins, trimming and glue strips are only taken into account if you put them in the sheet size or in the overlap. The sizes are read to 15 significant digits, so 0.3 ÷ 0.1 counts 3 sheets and not 4.