Event Entry Time Calculator
Enter how many people are coming, how many can be let in each minute at one entrance or desk, and how many entrances are open, and you get the minutes needed for everyone to get in, shown also in hours, minutes and seconds. Give an opening time to see when the last person is inside, or switch modes to type the minutes you can allow and get the number of entrances you need. It assumes a steady flow of people, nothing is sent anywhere, and it gives no safety or crowd-management advice.
Time to get everyone in
12 min
Minutes = people ÷ (people per minute at one entrance × entrances); entrances needed = people ÷ (rate × minutes), rounded up. It assumes a steady flow and is not a queue simulation or crowd-safety advice. The finishing time is rounded up to the next minute.
How it works
- Choose whether you want the time to get everyone in or the number of entrances needed.
- Enter the number of people and how many get through one entrance each minute.
- Type the number of entrances, or the minutes you can allow, depending on the mode.
- Add an opening time like 18:30 if you want the finishing time, then read the result and copy it.
What people use it for
Estimating the time to fill a hall
See that 120 people at 10 per minute through one door take 12 minutes, and 6 minutes with two doors.
Choosing how many desks to open
Enter 120 people, 10 per minute and 6 minutes to see that two entrances are enough.
Setting an opening time
With doors at 18:30 and 90 people at 15 per minute, see that everyone is inside by 18:36.
Questions
- How is the time calculated?
- Minutes = people ÷ (arrivals per minute per entrance × number of entrances). 120 people at 10 per minute through 1 entrance take 12 minutes, 90 at 15 take 6, 30 at 2 take 15, and 120 at 10 through 2 entrances take 6. The entrances needed for a target time = people ÷ (arrivals per minute × minutes), rounded up, and the page then shows the time those entrances actually take.
- How is the finishing time worked out?
- The opening time plus the minutes needed, rounded up to the next whole minute, so the time shown is never earlier than the real finish. If it falls after midnight, the page adds the number of days, for example 01:15 (+1 day). Enter the opening time as HH:MM on a 24-hour clock, or leave it empty to skip it.
- Which values are refused?
- The number of people must be a whole number from 0 to 1,000,000,000, the arrivals per minute above 0 and up to 1,000,000, the number of entrances a whole number from 1 to 1,000,000,000 and the target time above 0 and up to 1,000,000,000 minutes. A result above 1,000,000,000,000 minutes, or needing more than 1,000,000,000 entrances, is refused, and so is a value below 0.000000001.
- Is a steady flow realistic?
- Often not. Real crowds arrive in waves, checks take longer for some people, and a queue can build before the doors open. The page divides the numbers you give it and nothing more: it does not simulate a queue and it says nothing about safety, capacity limits or how to run an entrance.