Skip to content

Flooring Calculator

Add up the floor area of up to 10 rectangular rooms or zones, remove areas such as a fixed island or an alcove, add a waste allowance for cuts, and divide by the area one box covers to get the number of boxes to buy, always rounded up. Enter the price of a box, or the price per square meter or square foot, to get the total cost. Calculations use exact whole numbers, in meters or feet, so there are no floating-point surprises. It is a planning estimate and does not replace measuring on site or your supplier's advice.

Rooms and zones (up to 10)

Boxes to buy

14

Floor area to cover with 10% waste: 30.25 m²
Net floor area
27.50 m²
Area you will buy
30.80 m²
Left over after the job
3.30 m²
Total cost
$558.60
RowActionArea (m²)
1Add20.00
2Add7.50

A diagonal or patterned layout needs more waste than a straight one: choose 10 to 20 percent. This is a planning estimate, not site-level precision: measure on site and follow your product's installation guide. Boxes are sold whole, so the number is always rounded up.

How it works

  1. Choose meters or feet, then enter the length and width of each room. Set a row to Subtract to remove an area, and leave unused rows empty.
  2. Choose the waste allowance (5, 10 or 15 percent) or type your own, and enter the area one box covers, as printed on the pack.
  3. Choose how you know the price, per box or per area unit, and type it to see the total cost.
  4. Read the number of boxes, the area you will buy and the extra you will have left over, and check it with your supplier.

What people use it for

  • Laminate, vinyl or engineered boards

    Order the right number of whole boxes for a living room and a hallway in a single calculation.

  • Rooms with something to subtract

    Take away a kitchen island, a built-in wardrobe or a stair well that will not be floored.

  • Comparing quotes

    Change the box coverage and price to compare products by what the whole job costs, not by price per box.

Questions

How are the boxes worked out?
Net area is the sum of the rooms you add minus the areas you subtract. The area to cover is the net area × (1 + waste ÷ 100). The number of boxes is that area divided by the coverage of one box, rounded up to the next whole box. Lengths are read with up to 3 decimals and the area is kept as an exact integer, so a result such as 12 boxes is never 12.000000001 rounded the wrong way. The cost is boxes × price per box, or, with a price per area unit, boxes × coverage × price rounded to the nearest cent.
How much waste should I allow?
Retailer and calculator sites commonly quote 5 to 10 percent for a straight layout and 10 to 20 percent for a diagonal one, with more for herringbone or chevron patterns and for rooms with many corners. These are rules of thumb that were not checked against a manufacturer's installation guide: follow your product's guide. A diagonal layout needs more waste because every board meets the wall at an angle, so each end cut leaves a triangle that cannot be reused, which is why the tool does not assume one percentage fits all layouts.
Does it work for tiles or carpet?
The arithmetic is the same for anything sold in packs that cover a known area, such as tiles, planks or carpet tiles. It does not model grout joints, pattern matching, roll widths or the way planks are staggered, so for those use the supplier's calculator or ask for advice.
How precise is it?
The arithmetic is exact, but the input is not: walls are rarely perfectly square, floors are not always flat, and not every room is a rectangle. Split an L-shaped room into two rectangles. Measure on site, round up your measurements, and keep a spare box in case the product is discontinued, since batches can differ in color. The page makes no promise of site-level accuracy.