Skip to content

Garden Bed Plant Count Calculator

Enter the length and the width of a bed, the spacing between plants, the spacing between rows if it differs, and the margin you leave at the edges, and you get the number of plants in a row, the number of rows and the total. Tick the staggered option to shift every second row by half a spacing and see how many plants the shifted rows hold. The page also shows the unused length at the end of the rows. It uses one unit for every field, works in your browser and sends nothing anywhere.

Plants needed

21

7 plants in a row × 3 rows.
Planting area inside the margins
1.8 × 0.8 m
Row spacing used
0.3 m
Unused at the end of a row
0 m
Unused beyond the last row
0.2 m

Plants in a row = ⌊(length − 2 × margin) ÷ spacing⌋ + 1 and rows = ⌊(width − 2 × margin) ÷ row spacing⌋ + 1: the first plant sits at the margin and the last one inside the other margin. In staggered rows, every second row starts half a spacing further in and holds the same number of plants if the unused length at the end of a row is at least half a spacing, one fewer otherwise (none if the planting length is shorter than half a spacing). The page counts plants; it does not say which spacing suits your plant, so check the label or the seed packet.

How it works

  1. Choose a unit, then type the length of the bed, which is the direction the rows run along, and its width.
  2. Type the spacing between plants, the spacing between rows if different, and the margin at the edges.
  3. Tick the staggered option if you want every second row shifted by half a spacing.
  4. Read the plants per row, the rows and the total, then copy the summary.

What people use it for

  • Buying plants for a border

    A 2 × 1 m bed with plants 0.3 m apart and a 0.1 m margin holds 7 plants in a row and 3 rows, so 21 plants.

  • Comparing a square grid with a staggered one

    Tick the staggered option and see that the same bed takes 20 plants, because the shifted row holds 6.

  • Planning vegetable rows

    Give a wider spacing between rows than between plants and see how many rows fit.

Questions

How is the number of plants calculated?
Plants in a row = ⌊(length − 2 × margin) ÷ spacing⌋ + 1, since the first plant sits on the margin, and rows = ⌊(width − 2 × margin) ÷ row spacing⌋ + 1, and the total is their product. For a 2 × 1 m bed with 0.3 m between plants and a 0.1 m margin, 1.8 ÷ 0.3 is exactly 6, so 7 plants in a row, and 0.8 ÷ 0.3 gives 2, so 3 rows: 21 plants. The division is exact, so 0.6 ÷ 0.2 gives 3 and not 2.
How do the staggered rows work?
Every second row is shifted by half a spacing. A shifted row holds the plants that still fit inside the margins: the same number as a normal row if the unused length at the end of a normal row is at least half a spacing, one fewer if not, and none if the planting length is shorter than half a spacing. The first, third and later odd rows are normal rows. The page counts them separately, so the example bed gives 7 + 6 + 7 = 20. In a true triangular pattern the row spacing is about 0.87 times the plant spacing: type it in the row spacing field if you want it.
Which values are refused?
The length, the width and the spacings must be between 0.001 and 1,000,000 in the unit you chose, and the margin must be 0 or more. If twice the margin is larger than the length or the width, no plant fits and the page says so. A result of more than 1,000,000,000 plants is refused. The unit selector only changes the label: it does not convert the numbers you have typed.
Does it say what spacing to use?
No. The right distance depends on the plant, on its size at maturity and on how you grow it, so check the seed packet or the plant label. The page only counts how many plants a spacing allows, it does not draw the bed and it does not account for paths, beds that are not rectangular or plants that need different spacings.