Watering Can Trips Calculator
Type how many pots, trays or beds you fill, the litres that each one gets and the capacity of your watering can, and you get the total litres and the number of trips to the tap, with how many are full and how much the last one carries. It counts trips and litres only. It does not tell you how much water a plant should get or when to water: you choose the litres per container. Everything is calculated in your browser.
Trips with the watering can
4
Litres = containers × litres for each; trips = ceil(litres ÷ capacity of the can). With water already available, trips = ceil(max(0, litres − reserve) ÷ capacity of the can). It counts trips only and says nothing about how much water a plant needs.
How it works
- Type the number of containers you will fill: pots, trays, planters, beds or buckets.
- Type the litres that each container gets.
- Type the capacity of your watering can in litres, and the litres you already have, such as rain water, if any.
- Read the total litres and the number of trips, with the trips still needed after your reserve, then copy the summary.
What people use it for
Watering a balcony or greenhouse
See that 8 pots at 2 litres each need 16 litres, which is 4 trips with a 5-litre can.
Choosing a can size
Compare the trips with a 5-litre and a 10-litre can for the same job before you buy one.
Filling troughs and buckets
Count the refills for animal troughs, rain barrels or cleaning buckets from the litres each one takes.
Questions
- How are the litres and the trips calculated?
- Litres = containers × litres for each container, and trips = ceil(litres ÷ capacity of the can). With 8 containers at 2 litres and a 5-litre can: 16 litres, and 16 ÷ 5 = 3.2, so 4 trips. With 5 containers at 1 litre and a 10-litre can: 5 litres, 1 trip. With 0 containers it is 0 litres and 0 trips. If you type the water already available, trips = ceil(max(0, litres − reserve) ÷ capacity): 25 litres with 5 already available and a 10-litre can is 2 trips, and a reserve of 10 litres for a need of 5 litres is 0 trips.
- What are the full trips and the last trip?
- Full trips = floor(litres ÷ capacity): trips where the can is filled to the brim. The last trip carries the litres that remain after them, and the empty space is trips × capacity − litres. In the 16-litre example there are 3 full trips and the fourth carries 1 litre, which leaves 4 litres of empty space in the can.
- How is it different from the plant watering planner?
- The plant watering planner works out when each plant is due and builds a schedule. This tool does a different, smaller job: for a given amount of water to carry, it counts the trips. It never says how much water a plant needs or how often to water, so the litres per container are always your own figure.
- Which inputs are refused?
- The number of containers must be a whole number from 0 to 10,000,000. The litres for each container must be from 0.001 to 10,000 and the capacity of the can from 0.01 to 10,000 litres. A blank, negative or non-numeric field is refused with a message instead of a result. The optional field for the water already available may be left empty; if you fill it, it must be 0 or more and up to 1,000,000,000,000 litres, and the result then shows the trips after the reserve next to the trips without it. Decimals are read exactly: 3 containers at 0.1 litre in a 0.1-litre can give 3 trips, not 4.