One Rep Max Calculator
Enter the weight you lifted and how many clean repetitions you did, from 1 to 12, and see the one rep max (1RM) that seven published formulas estimate for it, next to each other, with their average. A table then gives 50 to 95 percent of that average, rounded to the plate step you choose, with the repetitions you can typically expect at each load. It works in kilograms or pounds. It is an estimate for planning your training, not a test and not medical advice.
Estimated one rep max (average of 7 formulas, rounded to your plate step)
115 kg
Formula by formula
| Formula | Calculation | 1RM (kg) |
|---|---|---|
| Epley | w × (1 + r ÷ 30) | 116.7 |
| Brzycki | w × 36 ÷ (37 − r) | 112.5 |
| Lander | 100 × w ÷ (101.3 − 2.67123 × r) | 113.7 |
| Lombardi | w × r^0.10 | 117.5 |
| O'Conner | w × (1 + 0.025 × r) | 112.5 |
| Mayhew | 100 × w ÷ (52.2 + 41.9 × e^(−0.055 × r)) | 119 |
| Wathan | 100 × w ÷ (48.8 + 53.8 × e^(−0.075 × r)) | 116.6 |
Percentages of your 1RM
| % of 1RM | Load (kg) | Typical reps |
|---|---|---|
| 50% | 57.5 | 12+ |
| 55% | 62.5 | 12+ |
| 60% | 70 | 12+ |
| 65% | 75 | 12+ |
| 70% | 80 | 12+ |
| 75% | 87.5 | 10 |
| 80% | 92.5 | 8 |
| 85% | 97.5 | 5–6 |
| 90% | 105 | 3–5 |
| 95% | 110 | 2–3 |
This is an estimate, not a test and not medical advice. Real maximums vary with the lift, your experience and how close to failure the set was. Repetitions per percentage are approximate (Epley and Brzycki inverted); above 12 they are not reliable.
How it works
- Choose kilograms or pounds, then enter the weight of your hardest recent set and the number of repetitions you completed (1 to 12).
- Read the estimate of each formula and their average. If they are close, you can trust the average more.
- Pick the smallest plate step you have, such as 2.5 kg or 5 lb, to round the loads in the percentage table.
- Use the table to choose working weights, and test a new maximum only with a spotter or safety bars and a proper warm-up.
What people use it for
Planning a program
Turn a set of 5 into a starting 1RM, then read off 70, 80 or 85 percent for your working sets.
Checking progress without a max attempt
Compare the estimate from this month's heavy set with last month's, without risking a true single.
Loading the bar with the plates you own
Round every percentage to your smallest plate step so the loads are ones you can really build.
Questions
- Which formulas are used, and where do they come from?
- With w the weight and r the repetitions: Epley w × (1 + r ÷ 30), Brzycki w × 36 ÷ (37 − r), Lander 100 × w ÷ (101.3 − 2.67123 × r), Lombardi w × r^0.10, O'Conner w × (1 + 0.025 × r), Mayhew 100 × w ÷ (52.2 + 41.9 × e^(−0.055 × r)) and Wathan 100 × w ÷ (48.8 + 53.8 × e^(−0.075 × r)). They are the forms listed on the Wikipedia page One-repetition maximum, read on 15 November 2026, which attributes Epley to Boyd Epley (1985), Brzycki to Matt Brzycki (1998) and cites Mayhew et al. (Journal of Strength and Conditioning Research, 2008). The others were not checked against their original papers.
- Why only 1 to 12 repetitions?
- The formulas were fitted on sets of modest length, and they drift apart as repetitions go up: for a 100 kg set of 20 repetitions they would range from about 135 to 212 kg, against 128 to 144 kg for 12 repetitions. Above 12 repetitions endurance and fatigue weigh more than maximal strength, so the page refuses the input rather than showing an average of numbers that disagree. Use a heavier set of 12 repetitions or fewer.
- How accurate is the estimate?
- It is a statistical estimate. It depends on the lift, your training level, how close to failure the set really was and how clean the repetitions were, so your true 1RM can be a few percent above or below. For a single repetition the page shows the weight you lifted for every formula, since that is by definition your 1RM. This is not medical advice: attempt a heavy single only if you are healthy, warmed up and safe.
- How is the percentage table built?
- Each row multiplies the average 1RM by the percentage and rounds to your plate step (half up). The repetitions column inverts two of the formulas: Epley, r = 30 × (100 ÷ p − 1), and Brzycki, r = 37 − 36 × p ÷ 100, and shows the range between them rounded to whole repetitions, or 12+ when they pass 12. It is an approximation: people differ a lot in how many repetitions they get at a given percentage.