Pallet Load Calculator
Type how many parcels you have to ship and how many fit on one pallet, and you get the number of pallets needed, how many parcels sit on the last pallet and how full the pallets are overall. If you also enter the weight of one parcel and the maximum load of a pallet, the page uses the smaller of the two limits, the pallet capacity or what the weight allows. It is plain arithmetic on your own figures: it does not know any carrier, pallet standard or loading rule, and nothing is sent anywhere.
Pallets needed
3
Pallets = parcels ÷ parcels per pallet, rounded up. With a weight, a pallet carries the smaller of its capacity and maximum load ÷ weight per parcel, rounded down. Box sizes, stacking and carrier rules are not modelled.
How it works
- Enter the number of parcels and how many parcels fit on one pallet.
- Optionally enter the weight of one parcel and the maximum load of a pallet, in the same unit.
- Read the number of pallets, the parcels on the last pallet and the fill rate.
- Copy the summary for your shipping notes.
What people use it for
Counting the pallets for an order
See that 25 parcels at 10 per pallet need 3 pallets, the last one holding 5.
Checking whether the weight is the real limit
With 12 kg parcels and a 600 kg limit, the pallet carries 50 parcels even if 60 would fit by size.
Spotting a nearly empty last pallet
See how many free places remain on the last pallet to decide whether to add parcels or reduce the order.
Questions
- How is the number of pallets calculated?
- Pallets = parcels ÷ parcels per pallet, rounded up, and the last pallet holds what remains. 25 parcels at 10 per pallet give 3 pallets with 5 on the last; 20 at 10 give 2 pallets, the last one full; 1 parcel at 8 per pallet gives 1 pallet holding 1. The fill rate is parcels ÷ (pallets × capacity used) × 100, so 25 parcels on 3 pallets of 10 is 83.33 percent.
- How does the weight limit work?
- The number of parcels a pallet can carry by weight is the maximum load ÷ the weight of one parcel, rounded down, and the page uses the smaller of that figure and the capacity you typed. Both fields must be filled in, or both left empty, and the two must use the same unit, kilograms or pounds for example. If a single parcel is heavier than the maximum load, the page says so instead of showing pallets.
- Which values are refused?
- The number of parcels must be a whole number from 0 to 1,000,000,000,000 and the capacity a whole number from 1 to 1,000,000,000. The weight per parcel must be above 0 and up to 1,000,000,000, and the maximum load above 0 and up to 1,000,000,000,000. A value below 0.000000001 is refused, and zero parcels give zero pallets with no fill rate.
- Does it know how parcels are stacked or what a carrier accepts?
- No. It does not model box dimensions, layers, pallet height or any carrier rule, and it gives no advice about packing. The capacity per pallet is a number you decide, from experience or from your carrier's instructions, and the page counts with it.