Volumetric Weight Calculator
Type the length, width and height of a parcel, the divisor your carrier uses and the weight the parcel really has, and you get its volumetric weight, the heavier of the two weights, which is the one a carrier usually bills, and the total for several identical parcels. It works in centimetres and kilograms or in inches and pounds, with the usual divisors ready to pick and a free field for any other. Each carrier sets its own divisor and its own rounding, so check its conditions. The arithmetic runs in your browser and nothing you type is sent anywhere.
Billable weight per parcel
12 kg
The volumetric weight is higher, so it is the one billed: 4 kg above the actual weight.
Volumetric weight = length × width × height ÷ divisor, and the billable weight is the larger of that and the actual weight. Each carrier sets its own divisor and its own rounding: read them in its terms and enter the divisor it uses. The page does not round up to the weight steps of a carrier, and it does not say which carrier is cheaper.
How it works
- Choose centimetres and kilograms or inches and pounds, then type the length, the width and the height of the parcel.
- Pick the divisor your carrier states, or choose the other divisor and type it, then type the actual weight of the parcel.
- Type the number of identical parcels if you are sending more than one.
- Read the volumetric weight, the billable weight and which of the two is higher, then copy the summary.
What people use it for
Checking a shipping quote
See why a light but bulky box is priced like a 12 kg parcel when it only weighs 8 kg.
Choosing a smaller box
Shave a few centimetres off one side and watch the volumetric weight fall below the actual weight.
Pricing a batch of identical parcels
Give the number of parcels and get the total billable weight for the whole shipment.
Questions
- How is the volumetric weight calculated?
- Volumetric weight = length × width × height ÷ divisor, and the billable weight is the larger of that and the actual weight. A box of 50 × 40 × 30 cm is 60,000 cm³, and with a divisor of 5,000 cm³ per kg it has a volumetric weight of 12 kg: if it really weighs 8 kg, 12 kg is the billable weight. In inches, 20 × 16 × 12 in is 3,840 in³, and divided by 139 in³ per lb it gives 27.626 lb. The page compares the two weights exactly, so a tie is reported as equal.
- Which divisor should I use?
- The one your carrier writes in its terms. The page offers 5,000, 6,000 and 4,000 cm³ per kg and 139 and 166 in³ per lb as ready-made choices, and any other divisor from 1 to 1,000,000 can be typed. It does not know which divisor a given carrier applies and it does not say which carrier is cheaper: a higher divisor gives a lower volumetric weight for the same box.
- Which values are refused?
- Each dimension must be from 0.1 up to 10,000 cm or in, the actual weight from 0.001 up to 1,000,000 kg or lb, and the number of identical parcels a whole number from 1 up to 1,000,000. Zero, negative numbers, text and empty fields give a clear message instead of a result, and a value outside these limits never produces a meaningless result.
- What is not included?
- Carriers often round the billable weight up to a step such as 0.5 kg or 1 lb, add fuel or size surcharges and apply limits on the longest side or the girth. None of that is in the page: it gives the plain figures, so use it as a check before reading your carrier's own rules.