Skip to content

Screen PPI Calculator

Enter the resolution of a screen in pixels and its diagonal in inches, and get its pixel density in pixels per inch, the real width and height in inches and centimetres, the size of one pixel in millimetres and the simplified aspect ratio. A 24-inch Full HD monitor comes out at about 91.8 PPI, a 27-inch 4K one at 163.2. Use it to compare monitors, phones and tablets, to judge whether text will look sharp, or to check that a design fits a physical screen.

Pixel density

91.79 PPI

36.14 pixels per centimetre, 2.074 megapixels.
Physical width
20.92 in (53.13 cm)
Physical height
11.77 in (29.89 cm)
Size of one pixel
0.2767 mm
Aspect ratio
16:9

PPI = √(width² + height²) ÷ diagonal in inches, with square pixels. The advertised diagonal is rounded by manufacturers, so the real density can differ slightly. Sharpness also depends on viewing distance and system scaling.

How it works

  1. Type the horizontal and vertical resolution in pixels, such as 1920 and 1080.
  2. Enter the screen diagonal in inches, as sold: 24, 27, 15.6 and so on.
  3. Read the PPI and the physical width, height and pixel size.
  4. Change the resolution or the diagonal to compare two screens, then copy the summary.

What people use it for

  • Comparing monitors

    See why a 27-inch 1440p screen (108.8 PPI) looks softer than a 27-inch 4K one (163.2 PPI) from the same distance.

  • Picking a laptop or tablet

    Check the density of a 13.3-inch 2560×1600 panel against a 15.6-inch Full HD one before you buy.

  • Sizing a design to the real screen

    Know the physical size of the display area in centimetres to print a mock-up or place a kiosk interface.

Questions

How is the PPI calculated?
The diagonal of the screen in pixels is √(width² + height²), by the Pythagorean theorem, and the PPI is that diagonal divided by the diagonal in inches. For 1920 × 1080 the pixel diagonal is √4,852,800 ≈ 2,202.9, and on a 24-inch screen the PPI is 2,202.9 ÷ 24 ≈ 91.79. The physical width is the diagonal times width ÷ pixel diagonal, and the same for the height, which assumes square pixels.
What is the pixel size and the pixels per centimetre?
One inch is 25.4 millimetres, so a pixel is 25.4 ÷ PPI millimetres on a side: about 0.277 mm at 91.79 PPI. Pixels per centimetre is the PPI divided by 2.54. A smaller pixel means a sharper image at the same viewing distance.
Why does the aspect ratio sometimes show an odd number?
The ratio is the width and height divided by their greatest common divisor, so 1920 × 1080 is exactly 16:9 and 2560 × 1600 is 8:5, usually sold as 16:10. When the simplified ratio is odd, as for 1366 × 768 (683:384), the page also names the common format it is close to, 16:9, within 3 percent, and says whether it is exact.
Is a higher PPI always better, and what is refused?
Density only tells how small the pixels are. How sharp a screen looks also depends on the distance you view it from, your eyesight and the scaling your system applies. The page refuses widths or heights that are not whole pixel counts from 1 to 100,000 and diagonals outside 0.1 to 1,000 inches. The listed screen diagonal is usually rounded by the manufacturer and the visible area can be a little smaller.