Skip to content

Tire Size Calculator

Type a tire size as printed on the sidewall, such as 225/45R17, to get the sidewall height, the overall diameter in millimetres and inches, the circumference, and how many turns the wheel makes per kilometre and per mile. Add a second size to see how much the diameter changes in percent and what your speedometer would then show: when it reads 100 km/h or 60 mph with the new tires, how fast you are really going. It is an arithmetic comparison of nominal sizes, not a fitment approval.

Real speed when the speedometer shows 100 km/h

99.62 km/h

Diameter change −0.38% (−2.4 mm). The speedometer shows 100.38 km/h when you really drive 100 km/h.
Measure225/45R17205/55R16
Sidewall height101.25 mm (3.99 in)112.75 mm (4.44 in)
Overall diameter634.3 mm (24.97 in)631.9 mm (24.88 in)
Circumference1,992.7 mm (78.45 in)1,985.2 mm (78.16 in)
Turns per km501.8503.7
Turns per mile807.6810.7
Sidewall change
+11.5 mm
Width / rim change
−20 mm / −1 in
Odometer shows 100 km for
99.62 km

Sidewall = width × aspect ÷ 100; diameter = rim × 25.4 + 2 × sidewall; the speedometer is set for the first size, so real speed = indicated speed × new diameter ÷ original diameter. Sizes are nominal: real tires vary with brand, rim width, pressure and wear. Check the sizes approved for your vehicle and the load and speed ratings before buying.

How it works

  1. Type the size of the tire the speedometer was set for, in the form width/aspect R rim, such as 225/45R17.
  2. Type the size you are considering in the second field, or clear it to see only the first tire.
  3. Choose km/h or mph and the speed read on the speedometer, then read the diameter change and the real speed.
  4. Check the sidewall and rim differences too, and confirm with your manual or a tire shop before you buy.

What people use it for

  • Choosing winter or replacement tires

    See how far a different width, profile or rim size moves the overall diameter compared with your current tires.

  • Understanding a speedometer error

    Find the real speed when the dial reads 100 km/h or 60 mph after changing to a taller or shorter tire.

  • Comparing the turns of the wheel

    Get the revolutions per kilometre or mile for gearing, odometer or cadence calculations.

Questions

How are the sidewall and the diameter computed?
In a size such as 225/45R17, 225 is the width in millimetres, 45 is the height of the sidewall as a percentage of the width, and 17 is the rim diameter in inches. Sidewall = 225 × 45 ÷ 100 = 101.25 mm. Overall diameter = rim in inches × 25.4 + 2 × sidewall = 17 × 25.4 + 2 × 101.25 = 431.8 + 202.5 = 634.3 mm, or 24.97 inches. For 205/55R16 the sidewall is 112.75 mm and the diameter 631.9 mm. Sizes are nominal; a real tire varies with the brand, the rim width, the pressure and the wear.
How are the speedometer figures calculated?
Circumference = π × diameter, and revolutions per kilometre = 1,000,000 ÷ circumference in mm (per mile: 1,609,344 ÷ circumference). The speedometer counts wheel turns and assumes the diameter of the original tire. With a new tire the real speed is the indicated speed × new diameter ÷ original diameter. From 225/45R17 to 205/55R16 the diameter falls by 0.38 percent, so a dial at 100 km/h means 99.62 km/h; the odometer likewise records 100 km for every 99.62 km driven. The page also shows the indicated speed for a real speed, which is the same ratio the other way.
Which tire sizes does it read?
Metric sizes written width/aspect, then R, ZR or a dash, then the rim, such as 225/45R17, P225/45R17 or 225/45 ZR 17 91Y; the load and speed ratings after the size are ignored. The width must be 100 to 500 mm, the aspect ratio 20 to 95 percent and the rim 10 to 30 inches. Flotation sizes written like 31x10.5R15 and sizes without a clear rim are refused with a message. The speed must be above 0 and up to 1,000.
Is a given difference acceptable?
This page gives no tolerance, because the acceptable difference depends on the vehicle maker, the country, the load and speed ratings and the rims. A different diameter also changes ground clearance, gearing and the work of speed-dependent systems such as ABS and stability control. A change of rim diameter or load index needs the approval of the manufacturer or a tire specialist, so use the figures to compare, not to decide alone.