Battery Charging Cost Calculator
Enter the energy of a battery, either in watt-hours or as milliamp-hours and volts, the price you pay for a kWh and the efficiency of the charger, and you get what one full charge costs, how many kWh it draws from the wall and how much of that is lost as heat. Add how many full charges you do each month to see the cost per month and per year. It works for a phone, a laptop, a power tool, an e-bike or a home battery, as long as you know its energy. Nothing is sent anywhere.
Cost of one full charge
0.0035
Cost = battery energy in Wh × price per kWh ÷ (1000 × efficiency). The efficiency is the share of the energy drawn from the wall that ends up in the battery; it is your own assumption, since it depends on the charger, the cable and the temperature. Standby draw after the battery is full is not included.
How it works
- Choose watt-hours, or milliamp-hours with the voltage printed on the battery, and type the value.
- Enter the price of one kWh from your bill, and pick a currency symbol if you want one shown.
- Set the charging efficiency as a percent or as a ratio; 80 to 90 percent is a common assumption, but it is yours to choose.
- Type the number of full charges per month, read the cost per charge, per month and per year, and copy the summary.
What people use it for
Costing a daily phone or laptop charge
See that a 15 Wh battery at 85 percent efficiency and 0.20 per kWh costs a fraction of a cent per charge, and what 30 charges add up to.
Comparing an e-bike with other ways to travel
Enter the battery of an e-bike, the price of your electricity and your weekly charges to get a running cost per month.
Checking a home or tool battery
Turn a battery pack of several kWh into a cost per full charge, including the share of energy lost while charging.
Questions
- How is the cost of a charge calculated?
- Cost = battery energy in Wh × price per kWh ÷ (1000 × efficiency), with the efficiency as a fraction. A 1,000 Wh battery at 0.20 per kWh and 100 percent efficiency costs 0.20; a 500 Wh battery at 0.30 per kWh and 80 percent efficiency costs 500 × 0.30 ÷ (1000 × 0.8) = 0.1875. The energy drawn from the wall is the battery energy ÷ (1000 × efficiency) in kWh, and the difference with the battery energy is shown as the energy lost as heat.
- How are mAh and volts turned into watt-hours?
- Wh = mAh × V ÷ 1000, so 5,000 mAh at 3.85 V is 19.25 Wh. Use the voltage printed on the battery, usually its nominal voltage. The result is only as exact as that voltage, because the real voltage moves while the battery charges. The page accepts up to 1,000,000,000 Wh or mAh and up to 1,000 V.
- What efficiency should I enter, and which values are refused?
- The page does not choose it for you: it depends on the charger, the cable, the temperature and the battery, and a measured value from a plug-in energy meter is better than a guess. In percent it must be above 0 and at most 100, as a ratio above 0 and at most 1, so 0.85 and 85 mean the same. A price of a kWh must be 0 or more and up to 1,000,000, and the charges per month 0 or more and up to 1,000,000; the field can be left empty and may contain a fraction such as 0.5.
- What is not included in the cost?
- Only the energy to fill the battery is counted. The power the charger keeps drawing once the battery is full, standby draw, fixed charges on your bill, the wear of the battery and any partial charge are left out. For a partial charge, enter the share of the battery as the Wh value. The monthly figure is the cost of one charge times the number you type, and the yearly one is twelve months of it.