Paver and Brick Count Calculator
Give the surface you want to cover, either as a length and a width in metres or directly in square metres, the size of one paver or brick, the width of the joint between pieces and a margin for breakage, and you get the number of pieces without the margin, the number to buy with it, the surface one piece takes with its joint and the pieces per square metre. Sizes are in centimetres or millimetres. Every count is rounded up to a whole piece, in exact arithmetic, in your browser, and nothing you type is sent anywhere.
Pieces to buy (with the breakage margin)
660
Pieces = ⌈surface ÷ ((length + joint) × (width + joint)) × (1 + margin)⌉, rounded up to a whole piece. The joint is added to both sides of every piece, so the edges of the surface and the joints along them are not counted separately; cuts, a laying pattern and the pieces sold by the pack are left to the margin. The page does not say which margin suits your pattern.
How it works
- Choose a length and a width in metres, or an area in square metres, for the surface to cover.
- Choose centimetres or millimetres and type the length and the width of one piece, then the joint width.
- Optionally type a breakage margin in percent for cuts and spoiled pieces.
- Read the pieces without margin, the pieces to buy and the pieces per square metre, then copy the summary.
What people use it for
Buying pavers for a terrace
Cover a 4 × 3 m terrace with 20 × 10 cm pavers and see the 600 pieces become 660 with a 10 % margin.
Checking the effect of a joint
Add a 1 cm joint and watch the count drop to 520 pieces because each piece now takes 21 × 11 cm.
Comparing two brick formats
Type another piece size and compare the pieces per square metre before you order.
Questions
- How is the number of pieces calculated?
- Pieces = ⌈surface ÷ ((length + joint) × (width + joint)) × (1 + margin)⌉, rounded up to a whole piece. A surface of 4 × 3 m is 12 m², which is 120,000 cm²; a 20 × 10 cm piece with no joint takes 200 cm², so 600 pieces, and 660 with a 10 % margin. With a 1 cm joint a piece takes 21 × 11 = 231 cm², which gives 519.5, rounded up to 520 pieces, and 572 with the 10 % margin.
- How is the joint taken into account?
- The joint is added once to the length and once to the width of every piece, as if each piece had half a joint on each side. The edges of the surface, the pattern of the laying, the cuts at the border and the pieces sold by the pack are not counted separately: use the breakage margin to cover them, and read your supplier's pack size on the order.
- Which values are refused?
- Each side of the surface must be from 0.001 up to 10,000 m, or the area from 0.0001 up to 100,000,000 m². A piece side must be from 0.1 up to 1,000 cm or from 1 up to 10,000 mm, the joint from 0 up to 100 cm or 1,000 mm, and the margin from 0 up to 100 percent. A total above 1,000,000,000,000 pieces, 0, negative numbers, text and empty fields give a message instead of a result.
- Does it say which margin or pattern to choose?
- No. A staggered pattern, a diagonal one or a curved edge needs more cuts than a straight grid, and the right margin depends on the material and on the person laying it. The page gives the arithmetic for the margin you type and nothing more, and it does not estimate sand, mortar or labour.