Tarp Size Calculator
Enter the length, width and height of what you want to cover, and how much extra you want on each side. The page gives the smallest tarp that does the job for the way you choose to use it: laid flat on top, or draped down to the ground on all four sides. You get the dimensions, the surface and the smallest size from a short list of common sizes that is large enough, turned if need be. Choose centimetres, metres, inches or feet. The calculation is done in your browser and nothing you type is sent anywhere.
Smallest tarp that covers it
320 × 220 cm
Draped: each side of the tarp = side of the object + 2 × height + 2 × overhang, so it reaches the ground all around. The example sizes are only common reference sizes, in metres; the real size of a tarp varies by maker, so check the dimensions of the one you buy. Seams, hems, tie-down loops and the shape of the object are not counted, and the page does not say what keeps a tarp in place.
How it works
- Choose the unit and whether the tarp is laid flat on top or draped down to the ground.
- Type the length and the width of the object, and its height if the tarp will be draped.
- Type the overhang you want on each side; leave it empty or type 0 if the tarp should just reach the edge.
- Read the size of the tarp, its surface and the nearest common size, then copy the summary.
What people use it for
Covering a woodpile
Find the tarp that covers the top and hangs down the sides of a stack of logs, with a margin all around.
Protecting garden furniture
Check the size for a table and chairs once the overhang you want is added on every side.
Covering a car or a trailer
Compare the flat and draped sizes and see the nearest common tarp that would fit.
Questions
- How is the size of the tarp calculated?
- Laid flat on top, each side of the tarp is the side of the object plus twice the overhang: length + 2 × overhang by width + 2 × overhang. Draped to the ground, the height is added on both sides of each dimension: length + 2 × height + 2 × overhang by width + 2 × height + 2 × overhang. A 200 × 100 cm object that is 50 cm high, with a 10 cm overhang, needs 320 × 220 cm draped, which is 7.04 m².
- How is the nearest common size chosen?
- The page keeps a short list of example sizes, in metres for cm and m, in feet for in and ft, and picks the one of smallest surface that is large enough, turning the tarp by 90 degrees if that helps. If two sizes have the same surface, the one with the shorter long side wins. The list is only an example of common sizes, not a list of what is sold: makers use different dimensions, so check the real size of the tarp you buy.
- Which values are refused?
- The length and the width must be from 0.000001 up to 1,000,000 in the chosen unit, and so must the height when the tarp is draped. The overhang must be 0 or more and up to 1,000,000, and an empty overhang counts as 0. Text, an empty length, width or height, negative numbers and absurdly large values give a message instead of a result, and the sums are done on exact decimals so that 0.1 + 0.2 is 0.3.
- What does it not include?
- The page treats the object as a box. Seams, hems, tie-down loops, a sloping roof, a rounded shape and the stretch of the material are not included, and the page does not say what keeps a tarp in place in the wind. Add a margin if the shape is irregular.